Recent content by Andreas

Has anyone noticed a "no signal" issue on the video preview after the new upgrade? I mean at close distances.

Thanks for the hand-catch video !

But why Z3 is not made compatible with Osmo? Is this a marketing decision again? Sorry but I'll skip this one, I would immediately place an order if Z3 was made to fit to both I1 and Osmo.

RC must be turned off to start the update, maybe you missed that. Also microSD has to have only one .bin the latest. And finally, check the .txt file in the card, there must be something there.

It sure did!

So nice we get the chance to see far away places and wonderful sites like this one! Cheers Norway, thanks!

By the way, I consider English humour the best by far! @The Editor keep the satire on...

I noticed recently while trying Pix4d capture in the android, DJI GO does leave something running in the background, probably has to do with social media crap task. Anyway, pix4d app warned me and I have to force stop DJI GO before launching the app.

Did the update and 3 batts, then RC. Don't forget to power-cycle RC after updating. I1-X3, everything seems to work inside hangar. Tomorrow will do the real test! In general, plan and mind your steps before starting the process, Don't rush into it and everything will be fine, hopefully.

We're called the local Duran Duran once, back in the days, a group of youngsters dressed like "totally 80's", playing decent music nevertheless. But for the looks - I hate myself..

Agreed with all comments about not trusting RTH unless it's used as a last resort in signal lost cases. However, I strongly suggest you set the RTH altitude higher than the building, especially if you plan to take off from the ground. It is not an uncommon case your bird, accidentally or...

I wish you to get your bird back in order asap. A rule of thump with this machine is to never loose your temper when something goes wrong!

I see no reply to confirm the trick fixed the issue. Is your problem with the camera view only, the RC link with AC (red light on the RC) or the app with the RC? What tablet are you using? If it's an Android, you should make sure USB debug mode is on. Did you try this?: Inspire 1-Linking the...

Where did you get this info? First time I see it.

No, you load the firmware and then you run batteries down to 0% (or less than 5%), but I guess this is what you mean. However, I didn't do that, since my batteries where full when updated, I proceeded with my next assignment flying cautiously, took some pictures and some nice shots over POIs...