Recent content by clouseau

You only need cellular if you plan to use other drone Apps or you need to download maps. Having either a portable hotspot or cell phone you can use as a hotspot is the best way to go if you find you do need cellular. When the I-pad gets either broken or too old you can just replace it with...

The new ESC's and motors remedy this issue, so I can only speculate that whoever did the repair work did something else to it, just not sure what. The only difference is these new motors with ESC's don't seem to be as powerful or as punchy as the ones that came off, but I trust it now a whole...

The motors will not shut down even in the CSC stick position. The remote, IMU, and compass have all been recalibrated numerous times to no avail. AC Firmware has been rolled back to V1.8 and RC to V1.6 still the problem persists. Currently shutting off the battery on the AC is the only way to...

The only issue you may have is that the V2 arms require slightly more power to raise and lower due to the arm clamps being tighter, so you may want to update the center frame servo motor assembly to the V2 version as well.

Ok, There's something definitely up with this Inspire, it's the only one that the motors will keep spinning after holding down the throttle, which forces me to have to shut off the battery to get them to stop spinning. I tried this on the other V1's, V2's, and Pro's I have in the company fleet...

When testing the Inspire 1 Pro motors without propellers do your motors stop when you hold down on the throttle? My motors won't stop rotating unless the props are installed. I haven't noticed this on any other Inspires before and I am wondering if this is a firmware issue or something else is...

Hello, I am in south Louisiana near New Orleans, I have been building and flying multi-rotors since when they were mostly made of wood with only model airplane props to use. I was a RC heli pilot and also a moderator on a very popular helicopter forum until the site was sold. I've also been...