Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by DSHdrone

  1. D

    Autopilot Beta Test

    So what do you mean by "re engage and go on"? When a particular automated maneuver is exited, the camera/gimble seem to be left in the last position they were pointing. This could mean to the aft of the craft. If I want to view forward to pilot the aircraft back home, how do I get the...
  2. D

    Autopilot Beta Test

    Can anyone tell me how to recenter the camera/gimble after completing an automated manuver? The C1 button does not seem to work?
  3. D

    FPVCustoms Long Range Booster Kit Issues

    I recently purchase the booster/antenna kit from FPVCustoms and installed it on my Inspire 1. Had no issues with the installed and followed their install video exactly. My problem is that when I turn on everything, I get a warning message in the DJI GO app. that states "POOR Image reception, be...
  4. D

    new lightbridge installed, now cannot activate it in Pilot App?

    I had to replace my Lightbridge module in my inspire 1 due to a failure. Rather than wait 6 wks for DJI to do it, I bought one off ebay. installed it and everything seems to be working ok, but when I bring up the DJI Pilot app, it tells me I must active the inspire 1. I have tried everything and...
  5. D

    FW v1.2.1.0 bug report thread

    Well after I was told by DJI Service Center in the USA, that it would be 6 weeks until they could troubleshoot and reflash my Inspire after the 1.2.1.0 firmware failed to install correctly, I went and purchased a 2nd Inspire. The 2nd bird came with firmware 16, so I had to try and install the...
  6. D

    New firmware update won't load

    I had the exact same result when i did the update. After a week of trying different things, i had to send the bird back to DJI for repair. They said 5 to 6 weeks until i get it back! What a screwed up process!
  7. D

    1.2.1.0 up on DJI download page

    Sure they happen, but what do I do next? I have called DJI and they have been little to no help. I think I know more about how the bird works than they do. And by the way, I am not the only one who this has happened to. If you go back and read many of the posts on various sites, there are many...
  8. D

    1.2.1.0 up on DJI download page

    Yes, as I said before, I have tried just about everything. The camera connection is not the issue. This was the first thing DJI support suggested and it did it several times. The Gimbal comes on and works just fine, so I would think if there was a connection issue there, the Gimbal would not...
  9. D

    1.2.1.0 up on DJI download page

    Yes, I have done everything you suggested above many times with the exact same result. Cannot get past version check in log file with device 8 and 15 always showing as not connected. No downloaded video on either of my 2 RC monitors. All else seems ok on RC and Bird. Again, I have to state that...
  10. D

    1.2.1.0 up on DJI download page

    I was thinking there might be a different port on the bird in which we could do the firmware update? What is the USB port for on the tail of the bird? I have been putting the .bin file onto the SD card and powering the unit up with no success. Does anyone know of a different method to get...
  11. D

    1.2.1.0 up on DJI download page

    I suspect it has something to do with "marginal timing" on some birds? I keep getting some random "device not detected" messages for some of the modules but I always get module 8 and 15 as device not detected. Therefore, since there is at lease 1 module detected, the firmware upgrade process...
  12. D

    1.2.1.0 up on DJI download page

    Yes, I am aware of the 2nd text file. It basically shows this everytime I try to do an FW update: [00010406]========== 2014.01.01 00:00:10 unsynchronized ====== [00010418]Packet [C:\WM610_FW_V01.02.01.00.bin] detected. [00010428]Packet upgrade start... [00010440]Packet checking...
  13. D

    1.2.1.0 up on DJI download page

    I too had exactly the same results. Aircraft keeps stating update firmware failed, reboot aircraft and try correct steps! I have tried everything possible and what I have read on the internet, but the results are no different. The 2 RC's upgraded fine, but I have no video on the 2 monitors...