Recent content by Lloyd

Thanks for the reply, I appreciate the encouragement! I don't have the harness or much experience with batteries, I was wondering how other Doug went as he might not be too far away... (also down under)

Hi mate, did you ever successfully rebalance your TB47? I have one that has one cell 0.1-0.2 A out of balance. Flattening to 0% and recharging using DJI charger didn't work.

Thanks for the heads up! Have been getting great results lately with that lens so would sorely miss it!

Unfortunately not my experience with GoProfessional. I bought the Inspire X5 compact landing mode case which didn't fit the drone properly and have waited 6 months for them to sort it out. I have it back now and all they did was cut out a bit more foam and remove the foam in the lid. There are...

Do these versions work well with the battery/voltage quirks? I had a scare yesterday with the motor overload/low voltage warnings and a forced landing.

I thought the 35–100 mm was quite an achievement but 175 mm at full telephoto blows it out of the water!

Got it working in January but haven't used it a lot, I'll admit. When I use it I don't fly much more than straight up, take the shots then down again. Photos are fine but there is noticeable wobble in video. I have a friend with a thermal camera so I should get him to look at the motor...

I successfully use the 35-100 mm on Inspire 1 with custom counterweights. I haven't found a longer prime than 45 mm though...

Thanks mate, that does sound more rigorous. I haven't heard (in my limited experience, granted) of anyone having trouble with the v2 locks. I know of the shortcomings of screw-ins, but have there been cases of v2 props coming off?

I got the e-mail about this as well... I don't understand what the difference is between this new mounting plate and the one which came on my I1 v2. Can anyone enlighten me?

They've got their Z30 but despite looking like it should fit, they only let it work on the M600 series...

Thanks, I wondered if I were just being paranoid... this case cost $800 and just doesn't protect the Inspire! I will get in touch with Go Professional.

Haha, anything which saves time is fine by me! So here are several thousands words' worth of explanation: The Go Professional compact landing mode case The very same case feeling reluctant to close It seems to me that the top of the airframe is the culprit With the aid of the spirit...

Yeah, that's a good point and I appreciate your input. The case in question does leave room for the X5 box and I agree, for long-term transport, it's better to put the gimbal in there. But for a day of site visits, I think it will save a lot of time being able to pull the Inspire straight out...

I recently got the Go Professional compact landing mode hard case (Pelican-style) and while it's great, it seems that it's not deep enough for the Inspire! Closing it puts a noticeable hump in the lid which means any impact when being loaded on a plane will be transmitted through the airframe...