Recent content by Mohan

another crazy bad *** flight - can you speed it x2 to make it even worse,,

Excellent R&D and thanks for sharing detailed info

You might be able to connect one camera using the AV input and the other camera using an HDMI input (if the camera has a HDMI output). That way you should be able to swith between AVI and HDMI on DJI Go although I haven't figured that one out yet as I have not plugged a HDMI camera into the N1...

You need to buy the DJI N1 video encoder which is a tiny flat box You take off the x3 gimbal holder and plate and use the 2 leads to connect to the N1 video encoder box You will receive 2 small cables - 1 lead is Gnd and positive video (yellow ) The other reserved lead has many wires but has...

It was always m1 prop that dropped and caused the wobble. Swapped M1 and M3 arms around and still had the problem. I found it cumbersome to swap the ESC around so I bought a spare set and replaced esc1 and it cured the problem. Subsequent flights I noticed a slight wobble and was getting...

You will be over the payload. I got around this by getting rid of the x3 gimbal camera and plate and using a small 10g camera and N1 video encoder which added 60g instead of 400g

I did sort my issue and is now flying perfectly. It was a faulty ESC on M1. Once replaced it was perfect. On subsequent flights I have come to appreciate that the alignment of the arms need to be 100% accurate. There is a notch that needs to lie in the groove perfectly Please check the arms...

Have you got the txt files on a ipad or android device? If you have then you simply enter the new account on your hand held device and simply synchronise your files with the new account on the cloud. You can also use a PC and go to the following site and download or upload all the txt files to...

I commented on my experience. I didn't think Spain was that kind of place. Nice to know what the "law" says but in practice never had any problems. I know neighbouring Gibraltar does not like UAV flying at all

No problems flying near estepona - just made sure I was not a nuisance or an inconvenience to others

video of replacing battery

Volker I don't think you can buy that battery from DJI easily. But there is a thread on inspire pilots where a clever member replaced the battery with a aftermarket battery. He put a video All you need is a 2S 3000ma battery x2 that fits into the 'cage' - you will need to connect the balancer...

5 hr not really bad if they can fix it while you wait on the day. I once drove to brussels to get my turbine fixed on my Scale RC heli when the compressor got damaged by a Foreign object. 11 hours each way from cardiff.. obsession.. :)

Heliguy in the UK is a authorised repair centre - give them a shout. not far from west sussex. Could drive there...

How about 8kms and back for a total of 16kms?