Recent content by r4nd0m

to be fair I dont mind such changes if it contributes to security or less fatigue impact on the gear ... 100kph do you really need it for a filming platform? you are not going to chase at that speed in town or even on the motor way - you would get the right angle to get the perfect shot - or...

I can confirm the Optipower works perfectly fine and almost fits the original casing - slightly thicker ... Optipower Lipo Cell Rx Battery 5000mAh 2S 25C OPR50002SRX Capacity................................5000mAh Cells.....................................2 C Rate Continuous.................25...

solved #25

Just ran into the same issue ... So I assume you charge with the discharge leads and the board based balancer and leave the original balance leads unused? --already validated- works this way ... I had to sacrifice a little on capacity to make it fit better, I went for this one which should...

after some time I wanted to update the Inspire and take it out again but found the transmitter potentially deep discharged though all other batteries are still minor/storage charged ... I have found an old thread on here showing the battery 2S with a moles connector but I was wondering if...

I didnt want any adapter so I bought mini hdmi to mini hdmi cables - they are difficult to get hold of but I got a 2m off ebay .. the description was "2m MINI to MINI (Type C) HDMI Cable v1.4 High Speed With Ethernet FULL HD GOLD"

all normal - the battery has been cycled 12 times - one note for discharge required but nothing else really

they have all been upgraded - previous version was Inspire_1_Firmwarev1.3.0.00_en - so all good usually - nothing in the logs either ...

hmm since the latest upgrade one of my batteries when starting the aircraft rocks the gimbal heavily for some reason ... for those who would like to have a look - Dropbox - 20150908_192915.mp4 unfortunately DJI europe are already offline ... anyone seen this before?

its more like the Align APS - fly to specific point, save, fly next, save, fly to next save - then fly to the various points again - the purpose for this I assume is to avoid crashing into obstacles by just selecting waypoints on a map - that may be well outdated ... looking at the google map...

well doing software development myself I know you should be quite serious about selection - everyone who doesnt give any feedback you usually purge from the list as they arent useful at all ... within the hobby though I dont know how much vendors pay attention to feedback ... I personally do a...

well what should I say, upgraded to 1.3.0.00 and have seen the following things so far: pretty much all settings have been reset back to default ..easy to deal with but: going into transport mode - the motors seem to work differently now - no longer as smooth and seems like uneven pulses while...

hey well one is MKheli as you already found out - we do heli and any sort of quads - inspire, phantoms, 250racers etc ... but surely helicopters are seen the most ... the other is MKMAA - http://www.mkmaa.club/ - again all sorts of models from planes, helis and quads

I'm in MK - generally fly on the weekend at our clubs near J14 or Yardley Hastings ... as well as elsewhere

not sure how to supply any feedback with regards to the features - so I'll add a few here ... Hover - nothing too fancy seems to work just fine and does what it says on the tin - even managed were well todays strong winds Follow - works quite good as well - however it seems like there is a...