Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by seattle_helo

  1. seattle_helo

    Inspire 3 fpv camera went black after update

    They had no other suggestions other than to send the unit back? Did you connect via USB to Assistant and reload firmware? That kind of an issue, especially right after an update really points to a mismatched module or corrupted file, etc. I would refresh via Assistant prior to packing up the...
  2. seattle_helo

    Zenmuse X7 + 16mm lens

    The X7 & 16mm combo can be extremely sharp. Especially at f8. No doubt there are some soft copies in circulation but I don’t think that’s typical. The 16 does exhibit some pincushion but that’s simple to correct in post as needed.
  3. seattle_helo

    Various Inspire 2 equipment for sale

    Thanks, Debantures. CF booms sold and UG1 cineSSD reader sold. If items in the above posts do not show SOLD next to them they are still available. Thanks for looking.
  4. seattle_helo

    Various Inspire 2 equipment for sale

    K, L & N batts sold. Charger power supply sold. Thanks for looking.
  5. seattle_helo

    Pucker factor...

    Other than some specialized situations I think RTH is a significantly better option than hover in place. Assuming GPS reception is still good at least then it will attempt to make its way back home and closer to you to hopefully regain control. And if GPS reception is bad, it's a wash since it...
  6. seattle_helo

    Various Inspire 2 equipment for sale

    Reduced pricing on used batts, motors and SSD's. Also selling a set of CF booms with motors, ESC's, wiring looms, etc. These were removed from a damaged aircraft. There is cosmetic damage in some areas and I can not verify the operational status of the motors or ESC's. The wiring looms seem to...
  7. seattle_helo

    I2 remote ID

    The I2 lacks the hardware to enable RID via firmware. Third party modules will likely be the only solution.
  8. seattle_helo

    Various Inspire 2 equipment for sale

    Multilink units sold.
  9. seattle_helo

    Various Inspire 2 equipment for sale

    > M batts > N batts SOLD Items are in Seattle, WA. Will only ship/sell to the continental USA. All payments via PayPal. Will ship either via USPS or UPS ground depending on if batteries are part of the sale. I'll be posting more items soon. Thanks for looking. nick
  10. seattle_helo

    Various Inspire 2 equipment for sale

    > K batts SOLD > L batts SOLD ... continued in next post ....
  11. seattle_helo

    Various Inspire 2 equipment for sale

    > I batts > J batts ... continued in next post ....
  12. seattle_helo

    Various Inspire 2 equipment for sale

    - I2 USB-3 card reader (model UG1). This is for use with 120/240/480GB cards only. Won't work with 960 cards. Reader itself is as new. Cable is not OEM but it is functional, longer (6') and high speed. $40 shipped SOLD - pairs of TB50 batts. All batts are used but functional. Most are under...
  13. seattle_helo

    Various Inspire 2 equipment for sale

    Selling some assorted I2 stuff: - a set of three Multilink units. Two are open/used and one is new in box. Condition of the used units is very good/excellent. SOLD - used landing gear servo. Functional with some cosmetic marks/scratches. $45 shipped - six used motors. All are functional...
  14. seattle_helo

    **SOLD** DJI Cendence Remote Controller with accessories **SOLD

    Excellent transaction. Thanks Fred!
  15. seattle_helo

    **SOLD** DJI Cendence Remote Controller with accessories **SOLD

    I’ll take it. I’ll PM you now.