Recent content by vince126

I have the original and the v2 props. V2 props have the foam stuffed in it. I am curious if V3 props have a different construction all together. Im looking to get another set of quick disconnect mount as well to get rid of the play on the red antenna. Its a shame the Inspire 2 only came with...

How can I get my hands on the v3 props? is it through tech support only?

Nice. Out of curiosity, can you try the other 3 red props on it to see if it produces any rattle?

I used a T8 bit and a 1/4 ratchet. be really careful when installing the new one, the metal retaining clip that releases the lock likes to come out when I was tightening it down. Make sure you hear it snap into place before screwing it in.

I've had good result with online technical support. Although they wanted me to send the entire drone back but I convinced them to just send me new props and mounts.

Spoke with DJI a few times now, they have escalated the issue and is sending me 2 new red props as well as another quick disconnect. Lets hope they are looking into it deeper instead of trying to send me new props until I find a good pair. here is a video, I encourage everyone to check their...

Update. I just swapped the entire red prop quick release/mount and the rattling is still there. So i decided to try the 3 red props on it. Only 1 of the 4 red prop did not produce a rattle when hand spun, leads me to believe that it either doesnt fit properly, or it is not balanced properly...

I just hand spun the starboard side rear and i can hear the rattle. port forward seems fine. I'll swap out the mount and report back on the post landing vibration and rattle.

I can confirm this as well. The red props have a noticeable play when grabbing the blade tips and moving it up and down while the white ones are solid. I received my Inspire 2 a few days back but have not been able to fly due to snowstorms, but when the props are idling on the ground it...