gimbal

Morning. I have a second controller setup as slave the I1 but the joysticks don't control the gimbal. I can change all the usual camera settings and control the gimbal via the app on the slave but just no control with the joysticks. Can someone point me to the settings which would allow...

Hi everyone. I have a quick question - I'm noticing, with my Inspire, that I'm getting about 5-10 degrees of unwanted side to side (panning) rotation on the gimbal when I move the left stick on the master controller left or right. So, whenever I move the copter from left to right or vice versa...

I run a dual control Inspire V1 upgraded to a V1 Pro with an X5 camera. Up until recently, the left thumbwheel on the pilot controller controlled only the pitch (up and down) of the camera gimbal. Now, it only controls the pan (left and right). The second controller operates the gimbal...

So yesterday I thought it would be good to get my Inpsire 1 out of its box after a flightless winter. Batteries charged I was good to go! On take off the landing gear didn't raise so I tried to do it manually but no response, I wanted to take some top down shots so it wasn't an issue. After a...

Hi Guys, Today I went flying, and I noticed something that was not present before. The issue is the cam panning alone when I am hovering. It's really slight and slow, but definitely there. Another issue is my gimbal which isn't perfectly aligned forward after some shots (set on follow mode). On...

Gimbal Noise on latest fw. After updating my gimbal now makes a loud grinding noise when calibrating (both on 12 & 45 mm). After calibration the noise stop. Does anybody else get this? Is it ok for it to make this grinding noise it never did before - or know how to fix it? Thanks.

Parting out an Inspire 1 that's been upgraded with the 3510 h motors. Inspire 1 shell with 3510h motors, Zenmuse 5 mounting plate with vibration pad -excellent condition - $650 Inspire 1 remote controller - excellent condition - $ 275 Power adapter/charger - $35 Original Inspire...

Lets learn from each other.... What are your settings for the (Advanced) Gimbal Settings? We like to make smooth videos and are looking for some tips for these settings. On DJI 4 Go App: go to: Gimbal Settings -> Advanced Settings Our settings are: Max Gimbal Pitch Speed (8) Gimbal Pitch...

Hi, I'm testing my new I2 + X5S these dasy and observed a strange behaviour. To Yaw the camera, you now need to press and hold C1 + turn Left Scroll Wheel (LSW). That works fine when I test it on the ground, when motors are running and during hover. But as soon as I raise the landing gear I...

deleted

Items are in like new condition Osmo handle kit: $250 shipped Osmo Z axis: $115 shipped Osmo handle kit includes: Original packaging, phone holder, back cap, 2 batteries & charger Osmo Z axis includes: Original packaging, back caps Free shipping to U.S. only. Will ship internationally but at...

Hey there everyone I have sort of "outgrown" my standard Inspire 1v1 with X3 camera, which is about 16 to 18 months old. My needs actually call for a Z3 camera (zoom) and most likely an XT camera (thermal) too, in the near future. 1. Do I upgrade my I1v1 with the I1v2 ESCs, motors, 1345T...

Hi Gang, New problem with the Inspire X5R. we are doing testing today because we have not flown in a month. Went to turn the gimbal and every 45 degrees or so it sticks making the footage not smooth in it's movements. It sticks over and over. I disconnect the camera and reinstall it to the...

Hello there, I am new to DJI's products but I am not new to quadcopters. We recently bought a Matrice 100 copter with a Zenmuse X3 gimbal and camera. I am able to connect everything up and I currently receive live camera footage on the DJI Pilot App on my tablet, but I am not able to get a...

I want to put together a non-aerial remote camera based on the OSMO/X3. I have identified most of the parts but are stuck on the gimbal GCU when not using an aircraft or the handle. I can get the camera, the camera base and lightbridge but do not know which GCU will work with the OSMO/X3 without...

Olá pessoal, gostaria de criar um espaço para os pilotos(as) brasileiros que tem interesse em aprender um pouco mais sobre pós-processamento e edição de vídeo com softwares mais avançados. Este tópico será focado em edição de vídeo com alguns dos principais do mercado: Adobe Premiere CC Pro(CS6)...

Hi to everyone on the forum, also for the warm welcome I have received. As many of you have probably now seen ( if you read my Introduction & Profile ), I am the Developer, Designer and Builder of the Disabled Individuals, Veterans, Ex Services and Others who have Debilitating Health ' EMS DRONE...

Selling a DJI Osmo 3-Axis Gimbal and 4K Camera (No Handle). I am getting a Inspire 1 Pro with the X5 camera and will be using that with the OSMO. $325. Here is a write up on the camera: DJI Osmo 3-Axis Gimbal and 4K Camera (No Handle) CP.ZM.000251 Email [email protected] if interested.

What kind of angles are people getting with the X3/X5 cameras before the picture is obstructed by the non-retracting landing gear. Any ideas on a landing gear / gimbal mod ???

After aligning my camera in a straight line with the path I want to fly I push the stick forward and my Inspire drifts to the right. I've updated the firmware to the newest version. I've done IMU, compass, RC, and gimbal calibration. I noticed when I landed that my camera looked slightly off...