upgrade

Hello everyone new to this Forum and posted something similar to what I'm asking now over at the DJI Forum but not to many responses. Anyways i'm coming from a Q5004k and wanting to step into the inspire club but with the x4s as that's what my budget says lol. A couple of questions. Also this is...

I am trying to upgrade my aircraft to latest version, however, DJI Go showing ".bin file corrupted" and unable to upgrade. Anyone of you facing the same issue? p/s I'd tried to re download several times from DJI website, but still encountered the same issue.

Hey guys, I have an Inspire 1 with a custom FPV camera I made and fitted myself using a immersionRC 600 microwatt transmitter I soldered into the PCB board, works reasonably well(roughly 1km range). I also have 4 TB48 batteries, 2xX3 cameras (1 broke in a crash, I bought a new one then fixed...

I've seen some posts about upgrading to the X5 with mixed results but they're all quite old. I'm wondering what people's experience or recommendations are for upgrading from and Inspire V1 to the X5. I'm not the most familiar with the forums so forgive me if this is a lame question. I undertand...

Hi all, I just did the 1.8 upgrade. Got it the wrong way round (RC first, then the AC) but it seemed to work. I did the batteries as well (3*TB47 and 3*TB48), and they all seem OK, too. However when flying into a light head wind during the test flight I noticed that it is slower than it was...

I plan on purchasing an Inspire by the end of this week, though I am not sure whether to go with the V1 or V2. I called Atlanta Hobby for their advice and was told that if I ever wanted to upgrade to the X5 camera I'd be better off with the V2. The customer service representative told me that...

Hi, I've spent hours searching and I have so far come up with no resolution. I unboxed my brand new Inspire 1 and proceeded to set up with the Go App, apparently the only way I can update the firmware for my aircraft. I went to the first on the list and updated the RC to the latest firmware...

Hello I´m trying to upgrade the firmware on Inspire 1 Pro currently is 1.2.1.06+ on the RC I get a message to upgrade the camera and battery firmware, I´ve tried to install the 1.3 or 1.4 versions but nothing happens, I´m using a SD card following all the instructions (put the file on the root...

Zenmuse X5 Series - Downloads - Manuals, Software, Drivers download | DJI Major Updates: 1.Updated list of compatible lenses: Olympus 25mm/f1.8, 45mm/f1.8 and 14-42/f3.5-5.6. 2.Increased the output bit-width of the sensor from 10bit to 12bit for 4kP30/25/24, 2.7KP30/25/24 and 1080P30/25/24...

Adding a second camera on the Inspire 1 is needed from my side to use the Inspire 1 in dual operator mode. So the pilot can focus on flying and monitor where the Inspire 1 is flying. On the other hand the camera operator can fully focus on the subject to get captured. Therefore I wanted to add...