Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Dimensions of Inspire 1

Discussion in 'Inspire 1 Discussion' started by ehcropydoc, Nov 17, 2014.

  1. ehcropydoc

    Joined:
    Feb 21, 2014
    Messages:
    40
    Likes Received:
    1
    I am looking at purchasing a Pelican Case and need to know which one to buy.

    I searched on DJI.com and they put the specifications at the following:
    438x451x301 mm (or 17.24 x 17.75 x 11.85 inches)

    Can anyone tell me if this is just the drone itself? aka...do these dimensions include props?

    Lastly, can anyone tell me the true dimensions with props on the unit facing like the attached thumbnail (don't judge, I did this in 2 minutes)? This is how I plan on storing it for travel.

    Thanks
     

    Attached Files:

  2. ehcropydoc

    Joined:
    Feb 21, 2014
    Messages:
    40
    Likes Received:
    1
    Again..I think I figured this out. The quad has 12 inch props so that means you just add 6 inches to one side and 6 inches to the other. So 17.75 inches + 12 inches = 29.75 inches total length as shown in attached photo.

    Correct me if I am wrong.
     
  3. gunslinger

    Joined:
    Nov 3, 2013
    Messages:
    1,941
    Likes Received:
    1
    Location:
    Southern New England
    I believe those are 13" props... no?

    -slinger
     
  4. ctp

    ctp

    Joined:
    Oct 31, 2014
    Messages:
    52
    Likes Received:
    4
    Yes. The new props for the Inspire are 13x4.5", part numbers 1345 and 1345R, per the draft owners manual.
     
  5. gunslinger

    Joined:
    Nov 3, 2013
    Messages:
    1,941
    Likes Received:
    1
    Location:
    Southern New England
    Does anyone know what class this quad is? 450? 550? Something totally different than standard???

    Thanks...
    -slinger
     
  6. DustyVisor

    Joined:
    Nov 19, 2014
    Messages:
    224
    Likes Received:
    109
    Location:
    Florida, USA
    Saw this on Instagram yesterday:
    IMG_4890.PNG IMG_4891.PNG
     
  7. mem_ny

    Joined:
    Nov 23, 2013
    Messages:
    221
    Likes Received:
    46
    great pick up. For those of us with the need for only one RC, the case manufacturers should consider a narrower or otherwise smaller case. Bigger is not better.
     
  8. DustyVisor

    Joined:
    Nov 19, 2014
    Messages:
    224
    Likes Received:
    109
    Location:
    Florida, USA
    Oh yea, they said in the earlier comments of that Insta post the case was 33x21x16
     
  9. Eric

    Joined:
    Mar 8, 2015
    Messages:
    243
    Likes Received:
    91
    Location:
    San Jose
    I'm not a 100% but I think DJI's original name T600 inspire 1 stems from the 450, 550... I could be wrong.