Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

DJI C1 Remote antenna wiring

Discussion in 'Inspire 1 Discussion' started by NeAmico, Jun 26, 2015.

  1. NeAmico

    Joined:
    May 23, 2015
    Messages:
    3
    Likes Received:
    0
    Hi All,

    I was playing with "range extenders" on my C1 and one question came up. There are 2 antennas and 3 wires inside having your left antenna (if looking from the bottom) connected by 2 wired to 2 different modules.

    Specifically two of those three connected to the MOBO on the right hand side (if you disassemble remote and looking from the bottom) and used by (just an example) FPVLR upgrade with helical antennas. This is the main link wireless chip. The last antenna cable (left hand side antenna) is connected to some module attached to a MOBO.

    Does anyone know exactly what is this module? My wild guess it's 5Ghz link to a second remote since I had no changes to the 2.4 spectrum after I've changed the antennas and powered up the drone.

    NB
    Ask DJI is the useless answer btw :)

    PS
    I will share what I have done to the drone in case someone interested.

    PPS
    Thanks anyway :)
     
  2. Kilrah

    Joined:
    Feb 3, 2015
    Messages:
    1,881
    Likes Received:
    728
    It's obviously that.
     
  3. DBS

    DBS

    Joined:
    Apr 6, 2014
    Messages:
    821
    Likes Received:
    14
    Location:
    Fort Pierce, Florida
    Explained here...
    FFWD to 4:30 to get to the point.
     
  4. NeAmico

    Joined:
    May 23, 2015
    Messages:
    3
    Likes Received:
    0
    Brilliant! Thanks!