Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Firmware Update 1.2.1 - ESCs making a lot of noise

Discussion in 'Inspire 1 Help' started by amkorp, Apr 26, 2015.

  1. amkorp

    Joined:
    Mar 14, 2014
    Messages:
    247
    Likes Received:
    62
    Location:
    Toronto, ON / Buffalo, NY
    I've been able to update 2 of my Inspires to 1.2.1 without any issues.

    However my third one gave me a weird issue. I've linked a youtube video so you can see/hear what's going on.

    The sounds it made went on for the entire 20 mins it took for the update to complete. I finally heard the D--DD from the camera meaning updated was successful and when I checked the log file it also said "success".

    As you can hear in the video, the camera is still making the standard DDDD sounds while performing the update. It's the very loud beeping that is coming from the ESCs that I've never hear before.

    I just wanted to find out if anybody else had this loud beeping from the ESCs when performing the update.

     
  2. The Editor

    The Editor Moderator
    Staff Member

    Joined:
    Aug 7, 2013
    Messages:
    6,721
    Likes Received:
    3,878
    Error....nope. Not heard that one before.
    The sound is actually coming from the motor bell housing and it's the esc's that are driving them at low frequency to act like loudspeakers (the same as they do when you hear your startup tones when you power up the Inspire - It's the motors making those tones :)).
    Having said that, the latest firmware did not change the esc's (from memory) so providing you do not get any error messages AFTER upgrade I would not be overly concerned about it.