Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

FPV Camera App and the missing Radar screen

Discussion in 'Inspire 1 Discussion' started by White Airwolf, Feb 10, 2016.

  1. White Airwolf

    Joined:
    Mar 18, 2015
    Messages:
    328
    Likes Received:
    70
    This app for the Inspire is by far the best one out there except it is missing the little radar screen seen in the lower left hand corner of the DJI app. This is a crucial item that needs to be added yesterday.
    Also, there needs to be an indicator on screen of shutter and ISO selections as is the case on the DJI screen.

    Until this is done, the app is too unreliable.
     
  2. FPV Camera

    Joined:
    Oct 22, 2015
    Messages:
    33
    Likes Received:
    11
    FPV Camera has an advanced Navigation Map built in combining radar and map. Navigation Map consists of an accurate Google Map (instead of Apple Map in DJI GO) framework and indicators of Home, Pilot, Aircraft, Pilot Wand. These indicators are shown on the map all time with auto-zoom and auto-bearing capabilities. This allows pilot having better idea of where are Aircraft and Home/Pilot location on the map.

    If you have directional antenna modded or windsurfer, Pilot Wand helps you aiming your antennas toward the aircraft to maintain better RF signal. You may use Custom Telemetry to display camera ISO and other telemetry data, though shutter and other manual mode data are unavailable yet.

    FYI, DJI GO map doesn't have auto-zoom nor auto-bearing. Please refer to Help > FPV Camera > Features for further details.

    [​IMG]
     
  3. slim.slamma

    Joined:
    Jan 12, 2015
    Messages:
    813
    Likes Received:
    224
    Location:
    nyc, ithaca
    C-1 button only does vertical or horizon can't switch between the 2.
    Week battery 20 mv - 200 mv? Not sure what this does...
    Rc signal 10-90?
    HD signal 10-90?
    Cpu? Is this the fuel consumption feature...
    Also does the app disconnects how dji go occasionally disconnect, will i still have the pilot wand visual. id freak out without that.
     
    #3 slim.slamma, Mar 20, 2016
    Last edited: Mar 20, 2016
  4. FPV Camera

    Joined:
    Oct 22, 2015
    Messages:
    33
    Likes Received:
    11
    A new FPV Camera v3.0 (currently under beta testing) will have C1 customization.

    I think you are referring to Custom Warning settings of weak battery as below. You may refer to fpvbooster.com for details.
    • Weak Battery: Display “Weak Battery cell#9, 9.999V, 999mV lower” when any battery cell has lower voltage than other cells more than custom level (Disable, 20mV, 40mV, 60mV, 80mV, 100mV, 150mV, 200mV). In normal circumstances, healthy (balanced) intelligent batteries should not have more than 100mV (by default) variation between battery cells with normal loading when aircraft in the air. You may adjust the sensitivity or disable it.

      When aircraft in the air with normal/heavy loading (~10A-20A current) is easier to trigger such Weak Battery warning than aircraft on the ground with light loading (~1A current). If this warning flashes a short period of time during takeoff or rapid ascending, you can then safely ignore it. If this message keeps flashing during flight, you may need to pay attention to this battery. You may also verify battery voltage with DJI GO > Aircraft Battery with loading when aircraft hovering in the air.
    CPU Usage is a custom telemetry showing current CPU loading % of your iOS device.
     
    slim.slamma likes this.