Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Gimbal Horizon Drifting with Yaw movements

Discussion in 'Inspire 1 Discussion' started by GizaDog, Mar 5, 2015.

  1. GizaDog

    Joined:
    Jan 15, 2015
    Messages:
    485
    Likes Received:
    234
    Location:
    San Diego
    Is anyone experiencing this issue to where when you make a left or right turn the horizon does not stay level but returns to level when its not moving. Any tips to get this working correctly?

     
  2. cinejeff

    Joined:
    Feb 19, 2015
    Messages:
    4
    Likes Received:
    0
    My first thought is to do an IMU calibration... and do it properly, on a truly flat and level surface and out of the wind completely. Once the IMU is calibrated, proceed to a compass calibration.

    Even though this appears to be an error in the gimbal, the gimbal is dependent on the aircraft operating properly.
     
  3. GizaDog

    Joined:
    Jan 15, 2015
    Messages:
    485
    Likes Received:
    234
    Location:
    San Diego
    Thanks and Ive done that a few times to no avail. If I keep turning it in one direction it levels out.
     
  4. gray52

    Joined:
    Aug 5, 2014
    Messages:
    362
    Likes Received:
    52
    Mine does this also, must be a firmware bug, hopefully Dji will sort it.
     
  5. lake_flyer

    Joined:
    Jul 17, 2014
    Messages:
    1,117
    Likes Received:
    353
    i thought it was gone, but today the horizon tilted up on the left again.....sigh.