- Joined
- Jul 26, 2018
- Messages
- 12
- Reaction score
- 2
Hey Inspire Pilots! I have an issue with the stock Inspire 1 Controller and was wondering if any of you have heard of this and know of what I should do to repair this issue. Basically, my controller is fully charged. Battery LED's show all four bright and full. Upon using, just about 5 minutes into the flight, the controller drops to "Low Voltage Alarm" with only one LED flashing, the connecting LED flashing Red, and constant Beeping. If I continue to fly, within a few minutes the controller will shut off. Next I plug it into the stock charger and it charges normally but reaches full charge in less than maybe 10 minutes with the LED's charge indication turning Off (going dark).
-Now here is the part I can not figure out any further. I do not believe this to be a common lipo old lipo battery issue. My background in RC is over 20 years and all my DJI batteries are always stored at 50% battery level and cycled every month. I also do have a second new lipo controller battery and I have opened the transmitter, replaced with a new lipo battery and the Same Exact issue continues. I am reaching out to our community in hopes you good folks may know of something I have missed. Something else is faulty here. I have also put the lipo on an external RC iCharger, cycled, checked the battery IR numbers, voltage and cycled. The lipo is not puffed and not damaged. Fully charged on an iCharger, installed back in the controller thinking the new battery may be defective, same thing. 5 minutes in, Low Controller Battery Alarm. If any of you can chime in and know of this issue or what I should check, please let me know! I very much appreciate all your feedback and interaction! This is a controller for my Inspire 1 V2.0 as well. Thank you everyone!
-Now here is the part I can not figure out any further. I do not believe this to be a common lipo old lipo battery issue. My background in RC is over 20 years and all my DJI batteries are always stored at 50% battery level and cycled every month. I also do have a second new lipo controller battery and I have opened the transmitter, replaced with a new lipo battery and the Same Exact issue continues. I am reaching out to our community in hopes you good folks may know of something I have missed. Something else is faulty here. I have also put the lipo on an external RC iCharger, cycled, checked the battery IR numbers, voltage and cycled. The lipo is not puffed and not damaged. Fully charged on an iCharger, installed back in the controller thinking the new battery may be defective, same thing. 5 minutes in, Low Controller Battery Alarm. If any of you can chime in and know of this issue or what I should check, please let me know! I very much appreciate all your feedback and interaction! This is a controller for my Inspire 1 V2.0 as well. Thank you everyone!