I was putting this lot together for a FPV modification for my Inspire but have decided to save up for the Inspire 2 so it's for sale. Everything bar the cameras are brand new. The cameras are used and good condition.
The receiver requires a power source which is supplied by a DSLR camera battery (two included) with a flat adaptor to be mounted on the back of your monitor.
The transmitter can be wired into the Inspire for power or use one of the 2 cell Li-ion batteries.
This lot cost me £235 and a lot of research!
I would sell as a kit all together for £175 including postage (UK only) - or nearest offer
• ImmersionRC Uno 5800 receiver
• DJI AVL58 5.8G Clover-Leaf Antenna (Pair)
• ImmersionRC 5.8GHz 200mW RaceBand Transmitter
• Zippy 800mAh 20C 2 cell 7.4v Li-Po
• Turnigy 800mAh 20C 2 cell 7.4v Li-Po
• Li-ion 7.4v 2900mAh batteries (Two NP-F300 ) & charger
• Battery adaptor for NP-F300 batteries
• RunCam Swift camera, std back, 600tvl, 120deg 2.8mm lens
• RunCam Swift camera, std back, 600tvl, 150deg 2.1mm wide lens
• Spare 2.8mm Lens for RunCam cameras
• 2x Power, OSD & video cables for Swift cameras
• Single hanging bracket for Swift camera
The receiver requires a power source which is supplied by a DSLR camera battery (two included) with a flat adaptor to be mounted on the back of your monitor.
The transmitter can be wired into the Inspire for power or use one of the 2 cell Li-ion batteries.
This lot cost me £235 and a lot of research!
I would sell as a kit all together for £175 including postage (UK only) - or nearest offer
• ImmersionRC Uno 5800 receiver
• DJI AVL58 5.8G Clover-Leaf Antenna (Pair)
• ImmersionRC 5.8GHz 200mW RaceBand Transmitter
• Zippy 800mAh 20C 2 cell 7.4v Li-Po
• Turnigy 800mAh 20C 2 cell 7.4v Li-Po
• Li-ion 7.4v 2900mAh batteries (Two NP-F300 ) & charger
• Battery adaptor for NP-F300 batteries
• RunCam Swift camera, std back, 600tvl, 120deg 2.8mm lens
• RunCam Swift camera, std back, 600tvl, 150deg 2.1mm wide lens
• Spare 2.8mm Lens for RunCam cameras
• 2x Power, OSD & video cables for Swift cameras
• Single hanging bracket for Swift camera
Attachments
-
DSC_0032.JPG582.3 KB · Views: 29
-
DSC_0034.JPG402.8 KB · Views: 27
-
DSC_0035.JPG446.8 KB · Views: 26
-
DSC_0036_1.JPG365.8 KB · Views: 26
-
DSC_0038.JPG410.1 KB · Views: 25
-
DSC_0041.JPG443.4 KB · Views: 25
-
DSC_0042.JPG403.6 KB · Views: 26
-
DSC_0043.JPG390.5 KB · Views: 27
-
DSC_0045.JPG457 KB · Views: 27