Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Made a hard landing and wondering if I lost screws.

Discussion in 'Inspire 1 Help' started by AERO 1, Mar 22, 2015.

  1. AERO 1

    Joined:
    Mar 12, 2015
    Messages:
    24
    Likes Received:
    3
    Location:
    St. Petersburg, Florida
    Does any one know if there are screws in these two locations. I crash landed and the part with the 4 rubber dampeners came undone. 2 of the dampeners came loose. I put the dampeners back in, but was wondering if there may be 2 screws that came out when it hit the ground. I looked for screws but couldn't find any, and I cant find any pictures online that say there are screws in these holes. I just find it odd that the rubber dampeners are the only thing(other than the data cable) holding the gimbal to the main frame. 20150322_190146.jpg 20150322_190159.jpg 20150322_190207.jpg
     
  2. AERO 1

    Joined:
    Mar 12, 2015
    Messages:
    24
    Likes Received:
    3
    Location:
    St. Petersburg, Florida
    Thanks Joola! So the entire gimbal system and camera are held to mainframe by rubber dampers? Wow, thats a lot of faith in rubber.
     
  3. AERO 1

    Joined:
    Mar 12, 2015
    Messages:
    24
    Likes Received:
    3
    Location:
    St. Petersburg, Florida
    Well, DJI designed it this way, so im sure its safe. crazy though, that camera system is relying on something so simple. Thanks again Joola.