Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Motors wont start after 1.3 firmware update

Discussion in 'Inspire 1 Help' started by mrtrizzle, Aug 17, 2015.

  1. mrtrizzle

    Joined:
    Aug 17, 2015
    Messages:
    3
    Likes Received:
    0
    When I start the motors outdoors, I am getting repeated notices for compass calibration and when calibrating, it says that there is a lot of interference after the second rotation. If starting the motors indoors, it says IMU initializing and I still cant start the motors. Advanced IMU calibration
    is successful but doesn't fix the problem. Please help. Thanks
     
    #1 mrtrizzle, Aug 17, 2015
    Last edited: Aug 17, 2015
  2. Aviator

    Joined:
    Jul 1, 2015
    Messages:
    389
    Likes Received:
    161
    Location:
    Dorset, UK
    Did you update the RC and the Batteries as well?
     
  3. mrtrizzle

    Joined:
    Aug 17, 2015
    Messages:
    3
    Likes Received:
    0
    I found out that it was metal/magnetic interference. I went to an more open area and it works, but I feel its a lot more sensitive now. I would say out of 10 locations i tried to launch, 6 or 7 times it would not start up. And some of these locations are at least 10 feet away from metal objects, such as fences and walkways. is this normal???
     
  4. MarqueGlisson

    Joined:
    Aug 14, 2015
    Messages:
    32
    Likes Received:
    10
    Location:
    Pacifica, Ca.
    This update worked GREAT for me but as soon as the .06 FW = Bricked - had to send it in.