Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Moving camera up and down with dial.

Discussion in 'Inspire 1 Help' started by Richard Negley, Dec 7, 2015.

  1. Richard Negley

    Joined:
    Dec 5, 2015
    Messages:
    4
    Likes Received:
    0
    Location:
    Azusa, California
    I recently bought the Inspire 1. Have loaded all the firmware to both the aircraft and RC. In moving the camera up and down with the dial, it appears irratic. At some cases when I roll the dial up fast it may go down or jerk and the oposite may occur when I roll the dial down. Surely this is not normal and how do I fix it? Any thoughts would be appreciated.
     
  2. msinger

    Joined:
    Oct 30, 2014
    Messages:
    203
    Likes Received:
    95
    Did you calibrate the remote controller in the DJI GO app? If so, do it again.
     
  3. Richard Negley

    Joined:
    Dec 5, 2015
    Messages:
    4
    Likes Received:
    0
    Location:
    Azusa, California
    Thanks for the reply.....I did but will do it again.
     
  4. Richard Negley

    Joined:
    Dec 5, 2015
    Messages:
    4
    Likes Received:
    0
    Location:
    Azusa, California
    I am also having problems with the App disconnecting during flight. Don't think they are related but thought I would throw that out as well. Am looking through the forum for similar threads/replys.
     
  5. jon b

    Joined:
    Jan 8, 2015
    Messages:
    394
    Likes Received:
    129
    Location:
    Chicago
    The daily takes practice to get good at it and that said, I still screw up and blow a shot here and there. If you're single handed, you might try one of the many 3rd party apps out there for assistance in camera control. Lots covered up here.
     
  6. Richard Negley

    Joined:
    Dec 5, 2015
    Messages:
    4
    Likes Received:
    0
    Location:
    Azusa, California
    As it turned out, calebrating the RC again INCLUDING THE WHEEL did the trick. thanks MSINGER.