Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Panning control

Discussion in 'Inspire 1 Help' started by huppe, Feb 1, 2015.

  1. huppe

    Joined:
    Jan 11, 2015
    Messages:
    899
    Likes Received:
    317
    Trying to find out how panning is working with single controller.If I read the manual I have to set my remote to slave to control pan and tilt.But as soon I turn on slave I can't link the remote to the Inspire.There is no link button to see in the app.I know that it's not possible to pan and tilt at the same time,but changing between the 2 modes is possible.
     
  2. rilot

    Joined:
    Aug 18, 2013
    Messages:
    1,184
    Likes Received:
    118
    Location:
    Twyford, UK
    You can only pan and tilt at the same time with a single remote by dragging your finger on your tablet screen. Tap and hold then move.
    Slave mode is if you have two transmitters.
     
  3. huppe

    Joined:
    Jan 11, 2015
    Messages:
    899
    Likes Received:
    317
    Thanks,but there must be an option to rotate the gimbal with your gimbal button on your remote control as far as I know?
     
  4. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30
    Easy, on your MASTER controller, USE C1 or C2 button to switch between PAN or TILT and this function can alternate between PAN and TILT and then use the RIGHT thumb screw on the side or the MASTER controller to do both functions.

    OK?
     
  5. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30

    CORRECTION: Should have said >>> LEFT

    Easy, on your MASTER controller, USE C1 or C2 button to switch between PAN or TILT and this function can alternate between PAN and TILT and then use the "LEFT" thumb screw on the side or the MASTER controller to do both functions.

    OK?
     
  6. rilot

    Joined:
    Aug 18, 2013
    Messages:
    1,184
    Likes Received:
    118
    Location:
    Twyford, UK
    He wants to do them at the same time though.
     
  7. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30
    I don't think you can... In fact, i was hoping the Camera would follow the subject but that's asking for a lot out of DJI at this point in time. Maybe later we all can push for this in the future FW upgrades.
     
  8. huppe

    Joined:
    Jan 11, 2015
    Messages:
    899
    Likes Received:
    317
    No I don't want to do this at the same time
    Just want to rotate with the gimbal button if possible
     
  9. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30
    Did you look at:
    INSPIRE 1 User Manual page 36?

    Will this work for you? That's all i know and it works for me.

    Hope that helps.
     
  10. huppe

    Joined:
    Jan 11, 2015
    Messages:
    899
    Likes Received:
    317
    Yeah I did,so I presume that "switch gimbal mode"is the one I needed,but this one is not working.Actually the manual is speaking about gimbal/pitch yaw,but that option is not showing only switch gimbal mode which I think is the same
     
  11. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30
    My Master Controller C1 is set to Ginbal Pitch/Yaw and this allows me to Switch from Pan by default, then I press the C1 and the Thumb knob becomes the Yaw and then I press C1 and back to Pitch. This works for me.

    Hope that helps,
     
  12. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30
    Make sure you scroll up and down for more setting options. 7 in total
     
  13. huppe

    Joined:
    Jan 11, 2015
    Messages:
    899
    Likes Received:
    317
    Ahhh,seems that I had to turn on remote and Inspire to get my 7 options.Before that I had only 5 options in the app.So everything is ready,now I need some good weather.Want to fly for longer than 5 minutes 'till next rain is coming. :)
     
  14. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30
  15. huppe

    Joined:
    Jan 11, 2015
    Messages:
    899
    Likes Received:
    317
    thanks for your help Steve
     
  16. Steve is Inspired!

    Joined:
    Jan 13, 2015
    Messages:
    146
    Likes Received:
    30
    All my pleasure huppe....
     
  17. Adelberg aerial imaging

    Joined:
    Nov 14, 2015
    Messages:
    213
    Likes Received:
    37
    Location:
    Baltimore MD
    Some suggested you can pan and tilt on the screen on the app . I see a verticals bar graph for tilt but not one for pan ?