Signal Issues

[dev_willis]

Hi!
I just got a new Inspire 1 v2 yesterday. I've flown it several times now and I keep getting errors about the compass, it says weak GPS signal a lot (even though conditions for GPS couldn't be better) and sometimes drops into Atti mode and out of it's flight program, and it will tell me that there is severe interference with the radio controllers when the drone is 15' away. I've tried to calibrate the compass but I can't complete the process. I follow the directions, rotating it 360 degrees, but only once did it advance to the next step and I never got past the second step.

Can anyone help me figure out what's going on?

Thanks!

 

[lake_flyer]

Did you check the firmware? What version do you have on the bird? Dropping into Atti was a flaw in the previous 2 firmwares, although many pilots never experienced the problem (like me). 1.9.1.30 is the latest.
Inspire 1 - Specs, FAQ, manual, video tutorials and DJI GO - DJI

 

[dev_willis]

The aircraft status screen says the firmware is up to date but it doesn't show me version number. Where can I find that?

Thanks!

 

[Eyeup Aerial Solutions]

3 dots in the top RH corner of the GOapp, scroll down and hit "About".

Here's some advice. Don't fly until you have been through firmware update, IMU, compass and stick calibration. You don't want to become yet another "fly away" statistic!