Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

X5 and Go Professional Cases

Discussion in 'Zenmuse X5' started by ajohnsonlaird, Oct 24, 2015.

  1. ajohnsonlaird

    Joined:
    Mar 4, 2014
    Messages:
    139
    Likes Received:
    56
    When you put the X5 mounting plate on, it will no longer fit into the Go Professional travel mode case -- the front of the X5 plate has two tabs that prevent the I1 from fitting down into the cavity.

    But...

    1. If you invert the I1 and put it into the case upside down AND remove the foam from the lid, you can at least transport the I1 by car. I would not ship it, though, as there is nothing to stop the I1 from rattling around against the lid of the case. You can hand carry the case with big long handle without anything wandering around inside the case.

    2. Go Professional says that they will have a new insert for the I1 with X5 in two or three weeks, but you will have to send the case back to them to have the new insert glued in.

    Andy.
     
  2. Quadpilot

    Joined:
    Jul 16, 2013
    Messages:
    624
    Likes Received:
    308
    Location:
    Chaska, MN
    Ever heard of an Exacto knife? ;)
     
  3. FangsCPO

    Joined:
    Apr 7, 2013
    Messages:
    947
    Likes Received:
    54
    Location:
    Chula Vista, CA
    Sounds great but I'm not a fan of having the foam glued in place. I learned early on that you want to be able to remove the foam so if and when you get dirt in between the case and foam it can be easily removed.
     
    The Editor likes this.
  4. ddublu

    Joined:
    Jul 1, 2014
    Messages:
    317
    Likes Received:
    11
    If it's glued in correctly, dirt can't get down the sides of the foam.