May be a duplication, did find a few previous posts... found a few in Inspire 1 section.
It's not the IMU calibration, or anything related to the I2... it's the Camera's Gimbal out of adjustment.
The area I'm interested in comments is the adjustment of the Gimbal YAW for centering.
The mag-nut adjustment, small movement to Lf or Rt.
Any experience on performing this adjustment on the X4S, X5S cameras?
Have 2- Inspire 2, 2 - X4S, 1 X5S and 1- X7
1 of the X4S & X7 on both I2's are center and correct.
The 2nd X4S and X5S are skewed to the Left a few degrees.
You can adjust within Go4App, although when you perform a reset gimbal that gets wiped too.
The degrees off are consistent on both I2's, indicating the problem is within the X4S & X5S, not the I2's.
The other X4S & X7 are correctly centered on both I2's.
Anyone offer a little more insight into the Gimbal's Mag-Nut adjustment and the procedure.
Any caution to observe or be aware of preparing or performing the adjustment?
It's not the IMU calibration, or anything related to the I2... it's the Camera's Gimbal out of adjustment.
The area I'm interested in comments is the adjustment of the Gimbal YAW for centering.
The mag-nut adjustment, small movement to Lf or Rt.
Any experience on performing this adjustment on the X4S, X5S cameras?
Have 2- Inspire 2, 2 - X4S, 1 X5S and 1- X7
1 of the X4S & X7 on both I2's are center and correct.
The 2nd X4S and X5S are skewed to the Left a few degrees.
You can adjust within Go4App, although when you perform a reset gimbal that gets wiped too.
The degrees off are consistent on both I2's, indicating the problem is within the X4S & X5S, not the I2's.
The other X4S & X7 are correctly centered on both I2's.
Anyone offer a little more insight into the Gimbal's Mag-Nut adjustment and the procedure.
Any caution to observe or be aware of preparing or performing the adjustment?