Clip Input Request

Mozi · Dec 3, 2017

I have a client that wants sunrise clips throughout the Jacksonville area. I have several others ready to go, but this one has me on the fence. I figured y'all may be able to provide some sound advise...

As I was flying this pass I realized that my downward sensors were still on and the drone was reacting to the waves as they passed below it. This is clearly visible in the footage. I flipped the sensors off for the next few passes, but they just aren't as good as this one.

Should the elevation bumps during flight remove this from the clips being provided to my client? Am I just being too picky? Any other feedback would be awesome as well.

PortCanaveralFlorida · Dec 4, 2017

:06 the uav lifts with no wave action under the craft, only smooth outgoing water. and at :08, I would expect the uav to rise, it didn't.

Mozi · Dec 4, 2017

Shot with the 17mm, it was either a wave out of shot or the sensors bumping in the transition from sand to H2O, but I agree that you can not see the wave at :06.

At :08 it didn't bump, but it did at :12 where the two waves were starting to stack.

I take it that you wouldn't recommend using?