Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Latest Firmware Broke the HDMI output on the second controller

Discussion in 'Inspire 1 Discussion' started by MindOverEye, Mar 14, 2015.

  1. MindOverEye

    Joined:
    Mar 8, 2015
    Messages:
    55
    Likes Received:
    25
    Location:
    Los Angeles
    We have 3 Ispire1's and on the two we updated, the firmware broke the HDMI output and seems to have drastically reduced the distance that the light bridge functions. Was working perfectly prior to the update. WHY will I never learn? Tried to do the right thing. Still got some sick shots, it doesn't seem to affect the pilots camera (iPhone6+). Such a bummer, any one have any thoughts?
     
  2. DCGOO

    Joined:
    Jun 4, 2014
    Messages:
    261
    Likes Received:
    35
    Location:
    Indianapolis
    Yes. Upgrade the firmware on the second controller. If you upgrade the AC, and the first RC, but not the second, Video is broken. You will have to place the second controller into MASTER mode to get the upgrade to install. This is all covered in the document that comes with the upgrade.
     
  3. MindOverEye

    Joined:
    Mar 8, 2015
    Messages:
    55
    Likes Received:
    25
    Location:
    Los Angeles
    Yeah - We of course updated all of the controllers at the same time - still no luck
     
  4. mdomeny

    Joined:
    Feb 23, 2015
    Messages:
    429
    Likes Received:
    50
    well, the manual does nkt state clear instructions for my understanding... it took me three runs to get the second controler updated... it says that you can update the controler via the air craft but does not say if there is an order to switch on the units prior to update... nor does it say you have to put the second tx into master mode and OFF or slave the previous master in order to update...
    so the manual is not that clear. maybe i missed something but i only got one page of instructions...
    any advice or correction greatly appreciated :)
    fortunatly i am done and got it figured out. i had to do the upgrade bc the unit was screaming for it...
    m