Today, X5 camera version was also changed to Dec. 10 instead of previous Dec. 9. Thanks.
Many thanks. The X5 1.2.0.50 dated 10 Dec is identical to that dated 9 Dec. When inserted into the X5 the start up is normal with no update beeps or tones. Again changing the date on a file is not good software configuration control. My Inspire 1 with X5 is at this standard - the first 2 lines [01 00] and [01 01] relate to the X5 camera and gimbal:
[00012604]========== remo-con disconnect. boot(15) ============
[00012650]Packet [C:\WM610_FC550_FW_V01.02.00.50.bin] detected, card sn [0x916224c2].
[00012695]Packet upgrade start...
[00012744]Packet checking...
[00012792]Packet vlink 01.02.0050 <-> 01.00.0030.
[00012858]Record vlink 01.02.0050 <-> 01.00.0030 (flow = 0).
[00012906]Done.
[00012951]Version checking[1]...
[00012997][01 00][00] v1.9.4499 -> v1.9.4499
[00013046][01 01][00] v1.9.4499 -> v1.9.4499
[00013096][01 04][00] v0.2.4270 -> v0.2.4270
[00013153][04 00][00] v1.28.0.15 -> v1.28.0.15
[00013232][03 05][00] v34.1.0.5 -> v34.1.0.5
[00013292][03 06][00] v2.4.0.5 -> v2.4.0.5
[00013392][05 00][00] v3.0.6.2 -> v3.0.6.2
[00013447][08 00][00] v2.14.9.26 -> v2.14.9.26
[00013552][09 00][00] v1.8.0.0 -> v1.8.0.0
[00013632][11 00][00] v3.8.15.4 -> v3.8.15.4
[00013732][12 00][00] v1.11.0.0 -> v1.11.0.0
[00013813][12 01][00] v1.11.0.0 -> v1.11.0.0
[00013913][12 02][00] v1.11.0.0 -> v1.11.0.0
[00013993][12 03][00] v1.11.0.0 -> v1.11.0.0
[00014107][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014193][17 00][00] v1.1.0.4 -> v1.1.0.4
[00014314][17 01][00] v2.0.1.2 -> v2.0.1.2
[00014377][19 00][00] v1.0.8.96 -> v1.0.8.96
[00016420]Packet upgrade cancelled at version checking.