Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Reaching the SD card - Everyone probably knows this...

Discussion in 'Off Topic' started by Frank508, May 17, 2015.

  1. Frank508

    Joined:
    May 9, 2015
    Messages:
    171
    Likes Received:
    92
    Location:
    SF Bay Area
    You can kneel behind the A/C and tip it onto it's rear gear, and it will stay there while you swap out cards.
     

    Attached Files:

    From Rent to Drone likes this.
  2. dmelle

    Joined:
    Mar 27, 2015
    Messages:
    60
    Likes Received:
    18
    Location:
    Dallas, TX
    That's exactly how I put my gimbal on and off!!! Works good for me :)
     
  3. thumpinhard

    Joined:
    Aug 12, 2014
    Messages:
    319
    Likes Received:
    45
    Location:
    GUerneville Ca.
    another tip for those who don't know. if you put the camera on before turning it on and then hold it up so as not to have the camera touching the ground and turn on the transmitter and then the camera the Inspire will go out of transport mode. Saves a step.
     
    toofastdave, CCTPREZ and Scotflieger like this.
  4. Highrpm955

    Joined:
    Feb 19, 2015
    Messages:
    538
    Likes Received:
    222
    Location:
    OKLAHOMA,USA
    A guitar stand works great for storage of the I1, or working on it. It hangs vertically by the cushioned holder on the stand, so you can clean the sensors, swap cards, camera on and off, etc.