- Joined
- Sep 20, 2014
- Messages
- 91
- Reaction score
- 23
- Location
- Atlanta, GA
- Website
- www.action4image.com ; http
I have noticed on my inspire, which is on the latest firmware and IOS app, that sometimes when I initially connect, all the channels 1-12 show high interference (tall red bars) when I look at the Lightbridge window. Then, when I change from auto to custom those red bars go away and I see what seems to be normal low level traffic on those channels. It looks to me like there might be a burst of static or rf noise that causes false readings initially, because when I then monitor over time, I NEVER see those channels look like that....
If you get a "strong interference" initially, open the Lightbridge window and click custom and observe the channels for a while and see if there is really a lot of traffic on them. If there is, then you might want to reconsider flying.
If you get a "strong interference" initially, open the Lightbridge window and click custom and observe the channels for a while and see if there is really a lot of traffic on them. If there is, then you might want to reconsider flying.