I bought a brand new X3 camera yesterday and have the red NO SIGNAL at the top. When I open it, it says Overall Status: Upgrade Required, and when I open that, it says Camera Requires Upgrade. It is a brand new camera fresh from the box, because my old one has to be sent off for a gimbal overload error (also brand new from the box, yay me). Am I 2 for 2 with brand new camera's going kaput, or am I missing how to upgrade a new camera after purchase? My firmware is up to date in the craft and RC already, and I've only added the new camera as a replacement to a bad one that came with it originally. First time attaching it, it does all this.
First camera had feed just fine, but had the gimbal overload (possible bearing issue).
Second camera no feed but moves fluidly and has the rubber booty on the gimbal whereas the first one did not.
EDIT: When I snapped a test photo with a grey screen to see if the camera even works since the motors all respond in the gimbal (assuming its just the video feed out) and go to library/On-Board SD, I get a "Cannot access the SD card, Camera Not Connected" pop-up. Connectors are good. Removed the nose, and no visible damage or connectivity issues found. No unusual noises at startup either and the camera does its typical spin-up dance and centers.
No crashes and "1" flight before first camera error... brand new from box and instant camera issues with both cameras!
Ideas?????
First camera had feed just fine, but had the gimbal overload (possible bearing issue).
Second camera no feed but moves fluidly and has the rubber booty on the gimbal whereas the first one did not.
EDIT: When I snapped a test photo with a grey screen to see if the camera even works since the motors all respond in the gimbal (assuming its just the video feed out) and go to library/On-Board SD, I get a "Cannot access the SD card, Camera Not Connected" pop-up. Connectors are good. Removed the nose, and no visible damage or connectivity issues found. No unusual noises at startup either and the camera does its typical spin-up dance and centers.
No crashes and "1" flight before first camera error... brand new from box and instant camera issues with both cameras!
Ideas?????